Top Coat 2K

Persistent high gloss two-component coating

A tough, glossy, two-component coating. It is moisture cured, so exposure to moisture and humidity will improve its performance and strength. When fully cured, the Numastec Top Coat 2K is rock-hard, chemical resistant, non-porous, and incredibly tough.

Durable and easily cleaned, it will not crack, chip, peel, or fade with age. Numastec Top Coat 2K will withstand even the most intensive UV environments.

  • Frame coating
  • Floor pans
  • Trunks
  • Snow Plows
  • Floors
  • Pipes
  • Holding tanks
  • Air conditioner and refrigerator parts
  • Field equipment
  • Lawnmowers
  • Any metal surface suffering from corrosion

RECOMMENDED USES

For use over primed or painted surfaces

QUICK FACTS

VOC content 340 G/L
Physical state and appearance Liquid
Boiling/condensation point > 137°С
Relative density 1.088 - 1.378 gjcc
Vapor pressure N/A
Vapor density 6.24 Max
Odor Paint-like
Solubility N/A
Available colors White, Black, Light gray, Dark red, Orange, Dark yellow, Dark blue, Clear, Dark gray, Light green, Dark green

The Numastec Top Coat 2K coating will be dry to the touch in less than an hour, but will take 3 to 4 days to reach maximum hardness. All surfaces should be dry and free of contaminates.

Apply mixed Top Coat 2K in 2 medium wet coats allowing 30 minutes to 1 hour between coats.