FC MX 260

Epoxy self-leveling floor coating

The Numastec FC MX-260 is a premium, self-leveling, rigid, two component epoxy coating with high impact and abrasion strength and very good resistance to acidic and basic solutions, used for self-leveling floor coating constructions.

Cures by reaction (cross linking)of the two components.

  • Solvent free.
  • Provides high tensile and impact strength.
  • Abrasion resistant.
  • Provides strong resistance to chemicals.
  • Self-leveling, so it provides perfectly even flooring results.
  • Resistant to bacteria and fungus.
  • Stops the creation of dust.
  • Decorate the surface and improves the working environment.
  • Gives a glossy and easy-to-clean surface.

The Numastec FC MX-260 is mainly used in heavy-duty industrial floor coating, either as a self-leveling coating or asathin-layercoating(paint).

Due to its properties is widely used for:

  • Heavy duly factories
  • High traffic car parking areas
  • Warehouses
  • Distilleries
  • Food preparation-packaging or storage factories
  • Night Clubs
  • Super Markets, etc

QUICK FACTS

Composition Pigmented epoxy resin + hardener. Solvent free.
Mixing ratio A : B = 100 : 300 by weght
Hardness (Shore D Scale) 40 +/- 5
Adhesion to concrete >2 N/mm²
Solids content 99%
Flash point > 200°С
Shock temperature Up to 120°С (15min)
Application temperature 12°С to 35°С
Pot lift 40 min
Light trafficking 24 hours
Final curing time 7 days

Surface Preparation

Careful surface preparation is essential for optimum finish and durability.

The surface needs to be grinded with a stone- or a diamond-minding machine. The surface needs to be clean, dry and sound, free of any contamination, which may harmfully affect the adhesion of the coating. Maximum moisture content should not exceed 5%. Substrate compressive strength should be at least 25MPa, cohesive bond streng th at least 1 .SMPa. New concrete structures need to dry for at least 28 days. Old coatings, dirt, fats, oils, organic substances and dust need to be removed bv a grinding machine. Possible surface irregularities need to be smoothened. Any loose surface pieces and grinding dust need to be thoroughly removed.

WARNING: Do not wash surface with water! Do not use a metal-ball blasting machine to grind the surface, because the heavy metal-ball impacts destroy the cohesion of the concrete surface and lower its stability.